Click image to view full size image
Silicon Carbide Grit 150 Abrasive Sanding Belts With Antistatic
Quick Detail:
WEEM 1128 wide belt is built with heavy duty YY weight polyester backing bond with close coated premium silicon carbide gains. WEEM 1128 wide belt is the best choice for Surface Finishing of MDF, Particleboard and Plywood Panels and others.
Description:
WEEM 1128 is design with premium silicon carbide bonded on anti-static treated YY weight waterproof polyester. Anti-static treatment made on backing to delay or prevent loading problem.
Silicon carbide is a very hard and crystal structure produces a fine straight edged grind lines. Care selection of gains, only premium silicon carbide is selected. It is superior for its ability to penetrate with light cutting pressures. SiC is primarily used for grinding nonferrous materials such as brass, copper, bronze, and wood, glass, rubber and plastics. It is also used to finish polyurethanes, primers, lacquers and sealers.
A closed coat product has a higher number of abrasive cutting points per square inch and results in higher stock removal rate and longer time before the abrasive wears out. Normally results in a better finish.
A strong bi-direction tape splice is used. Joint of WEEM 1128 wide sanding belts offer 4 types of joints
Tap on gain line joint: as default.
Tap on gain zizag joint:
Tap on butt line joint:
Tap on butt zizag joint:
Applications:
Woodworking /MDF/HDF/OSD/Partial board/Chip board/Glass/metal
Specifications:
